Grinding balls

VÍTKOVICE CYLINDERS a.s. is a manufacturer of steel grinding balls with a many years' tradition. The grinding balls have been produced since 1954 when the production process based on press forging technology was initiated. In 1961 the product range was extended by rolled grinding balls. The grinding balls are produced by VÍTKOVICE CYLINDERS using world-class equipment achieving high quality. In 1998 the entire production process was reequipped, heat treatment technology (quenching and tempering) was added and the product range was further extended.

The rolled and forged grinding balls are actually offered in the following nominal diameters:

16, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100 and 120 mm.

The grinding balls manufactured by VÍTKOVICE CYLINDERS satisfy the requirements of local as well as foreign customers from almost all over the world. The grinding balls are suitable for all applications in both wet and dry grinding. The typical application spheres include:

  • Mining industry – grinding of ores (iron, manganese, chromium, wolfram, molybdenum, copper, zinc, gold, uranium)
  • Building industry – grinding of sand and raw materials for cement (limestone) production
  • Power engineering – grinding of coal, blast furnace slag, etc.
  • Other – grinding of colour pigments, ceramic materials, etc.

The grinding balls of the diameters above are produced and offered in the following hardness classes:

Hard59-65 HRC
57-64 HRC
55-62 HRC
50-60 HRC
Medium42-55 HRC
Low240-360 HRC

Approximate chemical composition:

Diameter (in mm)
Chemical elements (in %)
C
Mn
Si
P
S
Cr
16 – 70
0,60 – 1,00
0,20 – 1,00
0,15 – 1,00
max. 0,035
max. 0,035
max. 1,00
80 – 100
0,60 – 1,10
0,20 – 1,35
0,10 – 1,20
max. 0,035
max. 0,035
max. 1,65

The grinding balls are produced of materials which have undergone a long-term development in the company and are continuously advanced to improve the end-use properties and customer satisfaction. The combination of high-quality wear-resistant steel and high grinding ball hardness ensures very low wear values during grinding. The heat treatment process is described in great detail so that each grinding ball is uniformly through-hardened which enables to achieve the best mechanical properties. The achievement of accurate volume hardness values is a matter of course.
In case of special requirements we can offer production and delivery of the grinding balls in other diameters and made of various material grades provided the quantity conditions are met.

Bc. Michal Kalus

Sales Manager

P: +420 596 664 704

P: +420 725 578 945

E: michal.kalus@cylinders.cz

Do you have questions?

By submitting the form, you agree to the privacy policy.

© ARSYLINE 2019
Warning
Close
The product has been successfully added to the cart
0.00with VAT

In the cart, you have products in the total value 0.00 € with VAT

Continue Shopping Show cart